France has upped the ante in the quest for fusion power by maintaining a plasma reaction for over 22 minutes – a new record. The milestone was reached on February 12 at the Commissariat à l'énergie atomique et aux énergies alternatives (CEA) WEST Tokamak reactor.
Code switch for: “I don’t have a point so why don’t you make it for me”
Verified electrical output, the answer is verified electrical power generated.
…as in we should measure power generation experiments by how much power they generated.
Isn’t that obvious?
They weren’t trying to generate electricity in this experiment. They were trying to sustain a reaction. As you said in another comment, they are different problems.
Converting heat to electricity is a problem we already understand pretty well since we’ve been doing it basically the same way since the first power plant fired up. Sustaining a fusion reaction is a problem we’ve barely started figuring out.
I don’t think we do have a means of converting this heat energy into electrical energy right now. With nuclear we put radioactive rods into heavy water to create steam and drive turbines…
What’s the plan for these fusion reactors? You can’t dump them into water, nor can you dump water into them… I don’t believe we have a means of converting the energy currently.
Even if we could dump water into them it would explosively evaporate because they run at 100 million degrees Celsius. That would be a very loud bang and whatever city they were in would be gone.
The idea is to have water or molten salt cool the walls of the torus from outside, and those drive ordinary turbines like any other generator. The main issue is that particles fly out of the confined plasma donut and degrade the walls, whose dust flys into the plasma and reduces the fusion efficiency. They’re focusing on the hard part - dealing with the health of plasma sustainment and the durability of the confinement walls over time. Hot thing that stays hot can boil water or salt to drive regular turbines, that’s not the main engineering challenge. I get your frustration where it feels from news coverage that they’re not focusing on the right stuff, but what you’ll likely eventually see is that the time between “we figured out how to durably confine a healthy plasma” will quickly turn into “we have a huge energy output” much like inventors puttered around with flight for hundreds of years until a sustained powered flight design, however crappy, finally worked. From that point, it was only 15 years until the first transatlantic flight.
Thank you for your understanding and explanation.
The walls get hot, you absorb the heat from the walls with a fluid. You use the fluid to heat water, you use the steam to drive a turbine, you use the turbine to turn a permanent magnet inside of a coil of wire. In addition, you can capture neutrons using a liquid metal (lithium) which heats the lithium, which heats the walls, which heats the water, which makes steam, which drives a turbine, which generates electricity.
If you poured water onto them they wouldn’t explode. 100 million degrees Celsius doesn’t mean much when the mass is so low compared to the mass of the water.
Most fission plants transfer the heat away from the reactor before boiling water. The same can be done with fusion.
The main difference with fusion is you have to convert some of the released energy to heat first. Various elements have been proposed for this.